|
|
Post by blitz50 on Apr 26, 2016 7:40:22 GMT -6
You guys that Pattern read, what is your adjustment to Trey? Especially looking for you guys that do it out of a 3-4, but interested what you 4-3 guys do as well.
|
|
|
|
Post by blitz50 on Apr 26, 2016 8:29:27 GMT -6
Kennywayne Where are you at. I know you have some insight.
|
|
|
|
Post by xdipster on Apr 26, 2016 8:55:41 GMT -6
Where do you align your weak side safety when you see trey? I like to cowboy up with SE away from Trey. Put WSafety In middle, Smash TE with Sam then get him under in flats. Mike and Safety can pull to TE if pass. Read #2 with Safety and Corner. Your Sam can get there a little late even, but must get hands on the TE.
|
|
|
|
Post by kennywayne9 on Apr 26, 2016 9:06:05 GMT -6
Where do you align your weak side safety when you see trey? I like to cowboy up with SE away from Trey. Put WSafety In middle, Smash TE with Sam then get him under in flats. Mike and Safety can pull to TE if pass. Read #2 with Safety and Corner. Your Sam can get there a little late even, but must get hands on the TE. I agree with all of that EXCEPT moving the backside safety to the middle. Align him over backside T, so he is still capable of fitting the edge weak vs run. He can easily get to #3 TE if he is vertical. |
|
|
|
Post by xdipster on Apr 26, 2016 9:44:20 GMT -6
In a 4-3, I would do that. A 3-4 you have an overhang backer to weak side. But its semantics. And you are right Kenny, he can still pull to verticle TE or whoever becomes #3 reciever.
|
|
|
|
Post by skinny51 on Apr 26, 2016 9:51:06 GMT -6
I am with Kenny on the alignment....He can eye #3 and play the run into the boundary...best of both worlds...
|
|
|
|
Post by Lebowski on Apr 26, 2016 11:48:02 GMT -6
Where do you align your weak side safety when you see trey? I like to cowboy up with SE away from Trey. Put WSafety In middle, Smash TE with Sam then get him under in flats. Mike and Safety can pull to TE if pass. Read #2 with Safety and Corner. Your Sam can get there a little late even, but must get hands on the TE. 4 jump yes? |
|
|
|
Post by xdipster on Apr 26, 2016 12:15:41 GMT -6
We just pull to 3. h3ll, I don't know what its called.
|
|
|
|
Post by Hands11 on Apr 27, 2016 7:14:03 GMT -6
Yes. We call it load coverage here. BS safety loads 3 vertical, and corner and front side safety play palms on 1 and 2. (Yes, Lebow I said palms!)
Also, what we see a bunch is teams will man 1 on the front side and play palms over 2 and 3, and walk the BS safety down into the run fit.
|
|
|
|
Post by kennywayne9 on Apr 27, 2016 7:19:30 GMT -6
Yes. We call it load coverage here. BS safety loads 3 vertical, and corner and front side safety play palms on 1 and 2. (Yes, Lebow I said palms!) Also, what we see a bunch is teams will man 1 on the front side and play palms over 2 and 3, and walk the BS safety down into the run fit. Who does this?! |
|
|
|
Post by Hands11 on Apr 27, 2016 7:21:43 GMT -6
Yes. We call it load coverage here. BS safety loads 3 vertical, and corner and front side safety play palms on 1 and 2. (Yes, Lebow I said palms!) Also, what we see a bunch is teams will man 1 on the front side and play palms over 2 and 3, and walk the BS safety down into the run fit. Who does this?!   |
|
|
|
Post by xdipster on Apr 27, 2016 9:25:13 GMT -6
Yes. We call it load coverage here. BS safety loads 3 vertical, and corner and front side safety play palms on 1 and 2. (Yes, Lebow I said palms!) Also, what we see a bunch is teams will man 1 on the front side and play palms over 2 and 3, and walk the BS safety down into the run fit. I'm trying to invision this. They man with Corner on 1, or do they take the sam out there and let corner and safety read, since they are used to doing so? |
|
|
|
Post by kennywayne9 on Apr 27, 2016 9:26:03 GMT -6
Yes. We call it load coverage here. BS safety loads 3 vertical, and corner and front side safety play palms on 1 and 2. (Yes, Lebow I said palms!) Also, what we see a bunch is teams will man 1 on the front side and play palms over 2 and 3, and walk the BS safety down into the run fit. I'm trying to invision this. They man with Corner on 1, or do they take the sam out there and let corner and safety read, since they are used to doing so? Hold on and I'll draw it up... |
|
|
|
Post by xdipster on Apr 27, 2016 9:26:49 GMT -6
okay. Thanks.
|
|
|
|
Post by Hands11 on Apr 27, 2016 9:27:29 GMT -6
Kind of Dip. I'll let KW continue..
|
|
|
|
Post by kennywayne9 on Apr 27, 2016 9:33:25 GMT -6
|
|
|
|
Post by Hands11 on Apr 27, 2016 9:35:29 GMT -6
Also dip, you can leave your mike in the box and expand your will if you feel he is better in space. |
|
|
|
Post by Lebowski on Apr 27, 2016 9:38:02 GMT -6
Good scheme.
|
|
|
|
Post by kennywayne9 on Apr 27, 2016 9:39:25 GMT -6
Also dip, you can leave your mike in the box and expand your will if you feel he is better in space. You can, but that usually goes against your alignment rules. You have to have a "bastage" check to get into that look. |
|
|
|
Post by kennywayne9 on Apr 27, 2016 9:40:09 GMT -6
Your nickel has to have a bit of DB skills to pull this off. It's not hard to teach.
|
|
